Get a Ukrainian support flag! Profit to Ukraine.
Report problem
You are not logged in Log In
Paytrail - Oma maksutapa kaikille
GATE WARFET Version 1.1GATE WARFET Version 1.1GATE WARFET Version 1.1GATE WARFET Version 1.1GATE WARFET Version 1.1GATE WARFET Version 1.1GATE WARFET Version 1.1
64,90 €
Recommended price
94,90 €

Incl. taxExcl. tax

Shipping costs?

Shipping costs are calculated automatically based on the total value of your shopping cart.


Orders placed before 1 pm (Eastern European Time)
will be shipped out on the same (Matkahuolto, GLS) or following (Posti) business day. Orders that contain installations or upgrade services will be shipped out after the job is complete.

Delivery on?

These are estimated delivery dates. Please take into account that orders are normally not transported on holidays and weekends. The order can be collected during the opening hours of your nearest pickup point. You can track your order with the tracking number found in the order confirmation email.

GATE WARFET Version 1.1

Note! GATE has released a software update of WARFET, which improves the current pre-cocking feature in the unit. Thanks to the update the pre-cocking is done instantly after the shot, when originally it was programmed to function with a small delay. The upgraded version can be recognized from the "Ver. 1.1" sticker on the box.

There is an illustrative video of the upgrade below. Props to GATE!

A MOSFET unit called WARFET that also comes with a tactical programming card?! With the WARFET you can win the fight before it even begins. That's where the name of the unit comes from.

WARFET is GATE's programmable MOSFET, which can also be used in "Plug 'n Play" mode. It is GATE's first MOSFET unit, which allows semi-only firing mode without any modifications to the cut-off lever. The unit’s programmable features are i.a. rate of fire (ROF), pre-cocking, on/off smart fuse, LiPo protection and fire modes (semi-auto, 1-5 BB burst and full auto). In addition, the unit is compatible with microswitches. It also comes with Tamiya mini connector adapters.

WARFET can be installed in two ways:

  1. Simple (Plug n' Play): The unit is attached directly between the battery and the gun - some features are disabled
  2. Advanced installation: All features are enabled - in this case the unit also directs the power straight from the battery to the motor and protects the trigger contacts.



  • Voltage range for batteries 7.2V14.8V (absolute minimum and maximum 3V17V)
  • Compatibility is excellent with powerful airsoft guns (i.a. DSG guns)
  • Easy to installyou only need to install the signal wire and change the old connections with trigger contacts
  • Full protection of the electric system (short circuits up to 1000 A)
  • Very low power consumption in standby mode (0.2 mA)
  • Very low resistance (2 mΩ)
  • Programming card with 29 LEDs and 3 buttons
  • Deans and Tamiya mini connectors

The package includes:

  • GATE WARFET unit
  • Extra pair of Deans connectors
  • Deans-Tamiya battery adapter
  • Signal wire (60 cm)
  • Dual signal wire (60 cm)
  • Tactical programming card
  • Quick start guide

MOSFET (Metal Oxide Semiconductor Field Effect Transistor)

The unit reduces power loss due to normal mechanical contact in the trigger switch. When using MOSFET only the signal current flows through the trigger switch and the actual running current goes directly from the battery to the motor. This prevents the burning of the trigger contacts, which is going to happen sooner or later, especially when using powerful batteries - the average lifetime for contact surfaces in an actively used gun is around one year. At the same time, the MOSFET unit enables the maximum power flow in the circuit without unnecessary resistance due to worn trigger contacts. This also gives you a higher rate of fire and a faster trigger response.

NOTE! You will only get all of the MOSFET's features with the advanced installation.

3rd generation MOSFET

The use of modern transistors and microprocessors has enabled the manufacture of small and reliable MOSFET units with microswitch compatibility.

Microswitch compatibility (digital signal processing)

With digital signal processing the MOSFET can filter out the vibrations of the microswitch during firing, which might cause excessive sparks and wear in the switch, lower rate of fire as well as heating of the motor, MOSFET, wires and battery, like with traditional MOSFETs. Since the MOSFET filters out the extra signal oscillation, there are no disadvantages of the vibrations created.

ON/OFF active brake

In operation, the motor and the gears accumulate kinetic energy (energy from motion). The magnitude of the energy is mainly determined by the speed of the mechanical parts. The maximum speed is reached approximately after the fourth shot. For this reason, the motor doesn't stop immediately after releasing the trigger, but continues to rotate for a moment. This is due to the accumulated kinetic energy; the more there is, the longer the motor keeps running "extra". The active brake is a feature, which stops the running parts with the motor immediately after releasing the trigger.

Benefits of ON/OFF active brake:

  1. No more double shots or double feeding. The gearbox performs only one full cycle with semi-auto. The piston always stays in the front position, which extends the lifespan of your gearbox.
  2. Realism - You get the exact amount of shots with every pull of the trigger as you meant. The advantage can especially be experienced with semi-auto builds.
  3. You can activate or deactivate the active brake according to your needs

NOTE! The active brake is only functional in the advanced installation.

Smart fuse

The smart fuse protects the MOSFET unit, the gearbox and the whole gun from electronic problems. The smart fuse is essentially an enhanced electronic fuse. The unit actively monitors the voltage, power and temperature, which ensures the fuse's reliability as well. The fuse protects your gun from both short circuits (SCP - Short Circuit Protection) and overloading (Overload Protection) as well as from overheating (OTP - Over Temperature Protection). Short circuit and overheating protection are important especially with LiPo batteries, because a short circuited LiPo battery might cause severe damage also to the gun.

Under Voltage Protection for different battery types (UVP)

Protects LiPo and Li-Ion batteries from excessive drainage. Adjustable for batteries of 7.4 V - 14.8 V voltages.


The MOSFET has been equipped with a feature, with which the users themselves can test the condition of the unit. With this feature we can ensure that a problem with the gun is not caused by the MOSFET unit. With the self-test the user can also easily check if the active brake is on or off.

Protective coating

The transparent protective coating protects the MOSFET unit from splashes, debris and minor damages.


The WARFET has a programmable microprocessor. The settings are stored in memory also when the MOSFET is disconnected from the battery. Changing the settings of the unit is really easy and it's done with the programming card included. The card is attached between the unit and the battery and the settings are automatically saved on the unit as they are changed.

Programmable features:

  • Active brake (ON / OFF)
  • Firing modes (semi-auto - full auto, semi-auto - burst, burst - full auto)
  • Rate of fire (50100%)
  • Adjustment of burst fire (1-5 BBs)
  • Pre-cocking
  • Smart trigger (ON / OFF)
  • Under voltage protection for 7.2V - 14.8V batteries
  • Dark mode

Instructions for the programming can be found in the included guide and in GATE's manual.

Firing mode adjustment

With the unit you can change your firing mode from the traditional full auto - semi-auto mode to semi-auto - burst, as well as burst - full auto modes. The burst fire first and foremost saves your BBs and enables a more fun, realistic and tactical play style! In addition, the burst fire can be set so short that the gun fires one shot bursts, which basically means you have a semi-only mode at your disposal! So the gun can be programmed to shoot semi-auto fire in both selector switch positions, which makes it even easier to make a self-loading semi-automatic rifle, or DMR!

NOTE! The burst fire-full auto mode only works in the advanced installation.

Rate of fire adjustment

The adjustment is based on Pulse-Width Modulation, PWM and it enables the rate of fire adjustment between 50100% (with 10% increments) regardless of the operating voltage. It does not take efficiency away from the gearbox's other features.

Adjustable burst

  • First and foremost the burst fire saves your BBs
  • If you release the trigger before the last shot, you can also shoot shorter bursts.
  • The timing of the bursts can be adjusted (36 levels) - enables the firing of shorter and longer bursts. The manufacturer promises that at least 1-5 shot bursts are possible!
  • The unit takes into account the drop in the voltage when the battery is draining so that it does not affect the amount of fired shots on burst.
  • The timing can be adjusted so small that the gun only fires one shot per trigger pull - which makes it possible to remove full auto with just the help of the WARFET. Excellent choice for semi-auto DMR rifles (semi-only restricted guns). Also works in the "Plug n' Play" mode.


Thanks to pre-cocking your shots leave immediately without a "semi-delay" and you ensure your victory on the field! It also enables the so called "Closed bolt" action, which could significantly increase the gun's accuracy!

  • The gearbox cocks the piston back after the last shot - the trigger response is therefore faster when the gearbox does not have to pull the piston back just before the shot.
  • The level of pre-cocking can be adjusted, which means you can influence the length of the response and use the feature in different rates of fire.
  • Either works automatically or trigger controlled - The automatic setting pre-cocks the piston after each semi-auto shot. When trigger controlled the user cocks the piston with the first pull of the trigger and fires with the other.
  • NOTE! Pre-cocking does not work in burst/full auto modes - However it does allow using two different semi-auto modes. The other selector switch position shoots semi-auto fire with pre-cocking and in the other position it shoots one shot "bursts" without pre-cocking!

Smart trigger

Enables the fastest possible trigger response. Works in cooperation with ROF adjustment. After connecting the battery, with the first shot the system sets the ROF adjustment to 100%. With the next shot the rate changes to a preset (e.g. 50%). Thanks to this the first shot always fires as fast as possible and the following shots according to the preset speed. You'll get the best effect by using batteries, which have a high operating voltage, like 11.1V LiPo/Li-Ion batteries. Thus, you can achieve a very fast trigger response, but still maintain a moderate rate of fire.

Dark mode

The unit flashes a blue LED light during firing. It can be switched off for example for night activities, if it bothers the user. The LED helps with diagnosing possible problems.

Two installation methods

1) Simple "Plug n' Play"
With the simple installation, you don't have to make modifications to the gun and the unit is directly connected between the gun and the battery. The unit can be directly connected to the Deans connectors or you can use the included adapter so that you can connect it with Tamiya mini connectors that are found in stock guns. Note, however, that the simple installation doesn't allow all possible features.

Available features:

  • ROF adjustment
  • Burst adjustment
  • Firing modes adjustment (only semi-auto - full auto OR semi-auto - burst)
  • Pre-cocking (only trigger controlled)
  • Smart trigger
  • Smart fuse
  • Under voltage protection
  • Dark mode

Following features are only available in the advanced installation:

  • MOSFET - in the simple installation all current goes through the trigger switch, so the unit doesn't protect your trigger contacts.
  • Active brake
  • Fire mode adjustment (burst-full auto)
  • Pre-cocking (automatic and trigger controlled)

2) Advanced
Advanced installation requires you to solder the trigger switch wires again and install the signal wire, like other GATE's MOSFET units. This will allow you to use all the features and the unit also protects the trigger contacts from burning!

Note! WARFET is not compatible with Airsoft Systems ASCU, Black Talon Concepts (BTC) or similar units.


GATE Electronics is a Polish company which made its debut on the airsoft market in 2008. Their goal is to provide high-tech electronics for airsoft players worldwide. GATE’s product range consists of MOSFET circuits for all kinds of uses, whether you want a MOSFET which only works as a MOSFET or a MOSFET circuit where almost everything is programmable. The GATE products are easy to install and reliable in use. The products are thoroughly tested and the company listens closely to feedback from end users to uphold the quality of their products.

24-month warranty

GATE MOSFETs have an extended 24-month warranty. It covers manufacturing defects and problems that come up in normal use. The warranty does not cover any fault that is caused by a faulty installation or misuse, like one caused by too high a voltage. You have to use a separate fuse, which protects the MOSFET from short circuits especially with more powerful LiPo batteries, when using NanoASR, -AAB and PicoAAB MOSFETs or SSR series MOSFETs which do not have an electronic fuse. The use of a separate fuse in other MOSFETs is recommended. You will find installation instructions on GATE's website or in Tradetech

Check the complete GATE collection here!

Compatible products

GATE WARFET Version 1.1 Power Module

GATE WARFET Version 1.1 Power Module

39,90 €
Recommended price
65,90 €
GATE Programming Button

GATE Programming Button

3,90 €
GATE Dual Signal Wire 60cm

GATE Dual Signal Wire 60cm

2,90 €
GATE Single Signal Wire 60cm

GATE Single Signal Wire 60cm

1,90 €
Recommended price
2,90 €

Check these out!



17,90 €
Recommended price
29,90 €


34,90 €
Recommended price
44,90 €
GATE TITAN™ V2 Expert Drop-In MOSFET/Microcontroller Unit (Rear Wired)

GATE TITAN™ V2 Expert Drop-In MOSFET/Microcontroller Unit (Rear Wired)

99,90 €
Recommended price
149,90 €
GATE TITAN™ V2 Expert Drop-In MOSFET/Microcontroller Unit (Front Wired)

GATE TITAN™ V2 Expert Drop-In MOSFET/Microcontroller Unit (Front Wired)

99,90 €
Recommended price
149,90 €

© - Airsoft - Army - Outdoor | Home | Contact Us | Terms and Conditions | About Us | Switch to Mobile Version