Incl. taxExcl. tax
Shipping costs are calculated automatically based on the total value of your shopping cart.
Orders placed before 1 pm (Eastern European Time)will be shipped out on the same (Matkahuolto, GLS) or following (Posti) business day. Orders that contain installations or upgrade services will be shipped out after the job is complete.
These are estimated delivery dates. Please take into account that orders are normally not transported on holidays and weekends. The order can be collected during the opening hours of your nearest pickup point. You can track your order with the tracking number found in the order confirmation email.
Templar's Gear CPC Gen. 4 is a postmodern, intelligent and modular protective vest for the needs of a soldier of the 2020s. The basis of the plate carrier is plate bags, which instead of traditional velcro attach to each other with ROC buckles (Rapid Open Connector). Other features of the vest include places for exchangeable front and back panels, velcro-operated loops for routing and clever plate bags.
The indisputable advantage of the ROC system is a certain kind of positive continuity: size adjustments do not change on their own, as ROC buckles always close the same regardles of hurry or magazines attached to front panel. The traditional velcro closure has a slightly different angle and circumference each time and when opening the front flap, pouches and magazines are often in the way. However, if necessary, adjustments can be made quickly using the opening on the back of the vest - even with the back panel in place! Removing the velcro also makes the vest thinner in the front, so even with the ballistic plates, the vest is not as thick as a more traditional plate carrier and the profile of a soldier in a laid up position is smaller.
Other advantage of the ROC system is also its speed, especially when removing the vest. If necessary, for example when falling into water or patching up a wounded fighter, the vest comes off the user in seconds. By opening all the buckles, the front plate bag completely detaches from the back plate bag, so the vests do not accidentally become a vague spaghetti around the wearer, but the thing breaks down into easily manageable small units. Also, putting the plate carrier back on is quicker than on traditional quick release systems, as there is no need to thread the wire.
With front and back panels it is easy to change the nature of the vest on the fly. The back panel can hold different "assault panel" configurations and the front panels can have different pouches for different magazines. The smartest way to attach the pouches on the back is to attach them to the panel, because then the the back can be emptied quickly, for example for a backpack.
The front panels are attached to the CPC with velcro and Fastex buckles. The back panel is attached with appropriately protected zippers and attachment hooks that are threaded into the PALS loops. According to our user experience, the back panel can be attached and detached from the carrier in less than a minute after a short break-in phase. The front panel slot is compatible with practically all SwiftClip attaching chest rigs and front panels!
Note! Front and back panels are sold separately!
The plate bags are designed to last: the laser cut edges are rounded so that the stress doesn't concentrate in one point. In addition, the actual plate bags have 3D pattern Gambeson laminate on the body side so that air can circulate. The fastening flaps of the plate bags are particularly long, so the use of slightly oversized plates is comfortable. Different "danglers" can also be hung from the plate bag closure velcro. On the upper part of the front plate bag there is a velcro matrix and loops for patches, IFF systems and radio PTTs.
Cummerbund has elastic sections, so it adjusts to movement comfortably and does not squeeze too much. In addition it has stiffeners inside to distributes the weight better. However, the best feature might be the "double" structure: pouches can be attached inside and outside. You can put, for example, a side plate or radio pouch on the inside, or any pouch/item you don't remove too often so the carrier stays rigid all the time.
Aboatac did a review of the older generation version (basic features are pretty much the same and this has only gotten better), take a look and fall in love!
Templar’s Gear represents the renaissance of European military gear manufacturers that began in the 21st century. American manufacturers dominated the tactical gear market for a long time, but the Old World was not yet ready to throw in the towel. In this continuum, Templar’s Gear represents the leading edge of high-quality, modern and well-designed gear. The defining characteristic of the company is that their products are manufactured using laser cutting and 500 denier Cordura, which makes the products a lot lighter without compromising reliability. Special attention has been paid to quality control in Templar’s pouches and gear, because a significant portion of the company’s customers are officials, whose safety and well-being might depend on the gear. The materials used by Templar’s Gear are IRR protected, so the user won’t glow in the night vision devices like a Ukrainian firefighter.
Templar's Gear products are delivered to us straight from the factory in Poland. This means that our product selection is updated to the latest and greatest generation almost in real time as replenishments are ordered. Thanks to the close cooperation and our frequent orders, we also have a chance to forward feedback and new ideas to the respective designers. If you as a user have any ideas for product development, we are happy to share them with Templar's Gear.
Templar’s Gear products are granted a two-year warranty. In more concrete manner this means that for example products sold this spring will have warranty for two action packed seasons of airsoft, shooting or whatever you decide to do with them.
The warranty covers all problems that might arise from defective materials or poor craftsmanship. Carelessness or misuse voids the warranty.
There is only one size of plate bags, so the variation is mainly taken care of by the cummerbund. In terms of length, the vest can be adjusted to practically any size user, as long as the length of the plate bags (32 cm) is not too much. The width of the plate bags is 26 cm, here are the distances of the attachment points of the cummerbunds (ie, in practice, the minimum-maximum length of one side of the cummerbund between the plate bags, ignoring the elasticity and attaching the velcro all the way) and the estimated suitable chest circumference:
Size: | Cummerbund Length, One Side: | Estimated Chest Circumference: |
Small | 21-30 cm | 85-110 cm |
Medium | 25-34 cm | 95-120 cm |
Large | 29-38 cm | 105-130 cm |
X-Large | 33-42 cm | 115-140 cm |
Note! Please do mind that the thickness of the plates (or even leaving them out) greatly affects the appropriate chest circumference! In addition, if the circumference of your belly region is larger than your chest, you should measure the circumference a little above the navel. For you all between the sizes, take a larger size if you plan to use plates. The table has been prepared with the idea that ballistic plates are carried in the plate carrier.
Note! The product does not include ballistic plates!
© Tradesoft.fi - Airsoft - Army - Outdoor | Home | Contact Us | Terms and Conditions | About Us | Switch to Mobile Version