photos Show more

---

---

Templar's Gear PT5 Battle Belt Gen. 3.1, Ranger Green

The unbearable lightness of tomorrow

The PT5 is a minimalist battle belt by design and it locks in place to the included under belt, which in turn is threaded to your pants like a normal belt. Thus, a steady package with a small footprint is created. The real advantage of the belt is the PALS matrix that follows a smart 0.5-1-0.5 breakdown. The matrix has a full PALS row in the middle and on top and bottom of it are half rows, so that you can attach pouches more or less normaly to the belt. See the product images for example on how to attach a FAST magazine pouch to the belt! In addition, the belt is equipped with pass-throughs so that you can thread the inner belt to go over the sleeve.

Features:

• Sleeve and under belt that attach to each other – sleeve has hook Velcro and under belt loop Velcro, making the fusion of these two very sturdy
• Ample attachment space: In size S there is a 20 × 2 PALS matrix, in size M a 22 × 2, in size L 24 × 2 and size XL 26 × 2.
• Stiffener inside to help carry loads
• Main seams are made using Dyneema yarn. This causes the very small grey
  seam visible in the product. Dyneema is 15 times stronger than steel and
  handles UV light very well.
• A very light structure: Size S weighs 170 grams, M 190 grams, L 200 grams and XL 210 grams
• The main material is 500D Cordura. Under belt is made of 1000D Cordura and Velcro.
• The width of the sleeve part is 66 mm, perfect for Clone Wars veterans
• Basically, any belt that is maximum of 45 mm wide can be used as an inner belt.

Gen. 1 vs. Gen 2 vs. Gen. 3 - What got better?

• Instead of adapters under belt and sleeve attach directly to each other, keeping the whole system in it's place better than before. If you prefer the old style, loop Velcro on the sleeve, we propose you look into the Bayonet Assault.
• Top PALS-attachment row opening now points directly upwards. This makes the PALS system even more rigid than before
• Belt has been added a plastic stiffener that helps to carry heavier loads like pistols.
• On Gen 2/3 belts the Dyneema yarn is grey, and on Gen. 3.1 it's the same colour as the main section of the belt.
  

Note! Product includes only the under belt that attaches to pants, inner belt that goes inside the belt is sold separately, we recommend a sturdier belt equipped with a Cobra buckle, like these from Bayonet ja Helikon!

Hey! If you are going to use the battle belt with multiple different pants we recommend getting another under belt. This way you don’t have to take out and put in the under belt every time.

Templar’s Gear – laser cut quality

Templar’s Gear represents the renaissance of European military gear manufacturers that began in the 21st century. American manufacturers dominated the tactical gear market for a long time, but the Old World was not yet ready to throw in the towel. In this continuum, Templar’s Gear represents the leading edge of high-quality, modern and well-designed gear. The defining characteristic of the company is that their products are manufactured using laser cutting and 500 denier Cordura, which makes the products a lot lighter without compromising reliability. Special attention has been paid to quality control in Templar’s pouches and gear, because a significant portion of the company’s customers are officials, whose safety and well-being might depend on the gear. The materials used by Templar’s Gear are IRR protected, so the user won’t glow in the night vision devices like a Ukrainian firefighter.

Cooperation - Yhteistyö - Współpraca

Templar's Gear products are delivered to us straight from the factory in Poland. This means that our product selection is updated to the latest and greatest generation almost in real time as replenishments are ordered. Thanks to the close cooperation and our frequent orders, we also have a chance to forward feedback and new ideas to the respective designers. If you as a user have any ideas for product development, we are happy to share them with Templar's Gear.

Extended three-year warranty

Templar’s Gear products are granted a three-year warranty. In more concrete manner this means that for example products sold this spring will have warranty for three action packed seasons of airsoft, shooting or whatever you decide to do with them.

The warranty covers all problems that might arise from defective materials or poor craftsmanship. Carelessness or misuse voids the warranty.

Sizing system:

As the PT5 consists of three parts, choosing the right size is a little bit more complicated than normal, but you should manage it well with the instructions below.

In the first column, there is a recommended user’s waist circumference and then the absolute measurements of the belt.

Size	Recommended waist	Max. length of under belt	The length of the sleeve
S	84-91 cm	~92 cm	77 cm
M	91-98 cm	~99 cm	84 cm
L	98-105 cm	~106 cm	91 cm
XL	105-118 cm	~118 cm	99 cm

The recommended waist is estimated with a Cobra buckle which length is around 7 cm. Different sized buckle naturally changes the way the belt fits!

We recommend that you first choose the size so that the ends of the sleeve will not overlap and will leave enough room for the buckle that has to fit between the ends of the sleeve. A person whose size goes between the ones given in the table should choose the smaller size so that there is enough room for the buckle between the ends of the sleeve.

You don’t have to worry about the size of the under belt as much, because it can be adjusted steplessly to be very small.